Nortel T7406 Manual page 9

Installation
Assign a Security code
1. Press the Options button.
2. Press SHOW.
The display shows 1. Set S.S. Code:
3. Press SHOW
4. Enter a six-digit Security Code. (Example 111111). The display changes to
show the code as entered.
5. Press OK to accept the code
6 Press NEXT.
The display shows 2. Send S.S. Code
7. Unplug the AC power adapter connection to the base, and plug it back in again.
8. Within 15 seconds, press and hold the the OK button for five seconds to send
the Security Code to the base and be sure the transfer is complete. The display
shows " Send OK! ", and you will hear a beep when the transfer is successful.
9. Press NEXT until display shows 3. Handset ID
10. Press SHOW
11. Press 1, 2, or 3
12. Press OK to accept the handset configuration
13. Press the Options button. The display show Time and Date from the KSU.
Nortel Networks Confidential
T7406 – Technical Session May 17-01 9
9