Handset Signal Detection - Nortel T7406 Manual

Handset Signal Detection

You can monitor the handset signal strength while moving to different
locations. The antenna/signal and battery icons appear on the handset
display.
When you move too far from the base, the following occurs on the handset:
•The antenna / signal strength icon , will disappear.
•Scanning... message appears.
•Produces an intermittent beep.
If the signal strength is weak, move back into range to stop the handset
display messages and warning tones.
If you go completely out of range during an active call, the call is immediately
placed on hold. To retrieve it once you move back into range, select the
flashing red line button.
16
Nortel Networks Confidential
T7406 – Technical Session May 17-01 16