Setting The Dip Switches - Nortel T7406 Manual

Installation
Connect the Line Cord(s) into the
telephone jacks on the Base. Connect the
other end into the a telephone port on the
KSU
Note: Connect one line cord for each
handset. Maximum of 3 per base.
Plug the small end of the power adapter
into the back of the base. Plug the power
adapter into an AC outlet.

Setting the Dip Switches

On the first base, set the dip switches to
operate in the upper half of the ISM band.
From left to right, the dip switch settings
are Down-Up-Down.
On the second Base, set the dip switches
to operate in the lower half of the ISM
band. From left to right the dip switch
settings are Down-Down-Up.
7
Nortel Networks Confidential
T7406 – Technical Session May 17-01 7