Ring Selection - Nortel T7406 Manual

Installation

Ring Selection

You can accept or block calls from ringing at your handset by using the Allow calls
feature. When you receive a call and the Allow calls feature is OFF, line
buttons and the light collar will flash but the call does not ring.
To assign ring selection:
1. Press the Options button.
2. Press SHOW.
3. Press NEXT three times.
The display shows 4. Ring selection.
4. Press SHOW.
The display shows Allow Calls.
5. Press OFF to prevent calls from ringing at the handset. Do Not Disturb appears on the
display when Allow calls is OFF. Note: Press ON to allow calls to ring at the handset.
6. Press the Options button.
The display changes to show the Time and Date from the KSU.
Nortel Networks Confidential
T7406 – Technical Session May 17-01 11
11