Table of Contents
Advertisement
HOME button repeatedly and it would circulate between these two mentioned
menus.
5.2.5 FUNC button
To be precise, this button should be CONFIG, as it's meant for system
configurations. We call it FUNC simply to respect the custom. After pressing
the FUNC button the setting menu appears, to navigate the marker in this
menu, use left/right key (+,-key). Press ENTER to select. Menus with
resemblance to this one would appear in other functions as well.
5.2.6 Knobs
There are 3 knobs on the left side of the machine. The big one on the
front panel is function knob, the same as the small one on the upper left side,
while the other one is audio control knob.
Rotating the function knob is equivalent to pressing the +,- key. The knob
can be pressed, and pressing it equals to pressing ENTER, normally.
The audio control knob is capable of controlling volume, squelching, level
prompt tone central point, etc. The exact function is relevant to settings. For
example, in situation where the squelcher hasn't been enabled, this knob
cannot be used to adjust squelching. Pressing the knob can switch among
those function controls mentioned. Tone will be played after pressing the
Advertisement
Table of Contents
