Table of Contents
Advertisement
settings in different segments are independent. By default, once the frequency
is changed into another segment, the settings would be altered to exactly the
last set of parameters of that segment. The isolated frequencies that don't
belong to any segment would be regarded as the (N+1)th segment, which
means these frequencise would be using the identical setting.
For example, user is listening to 101.7MHz broadcast, which adopts FM
demodulation with 200kHz demodulation bandwidth. In the prior setting, user
was receiving communication signal at 8.350MHz, which adopts USB
demodulation with 3kHz demodulation bandwidth. Anytime when user wants
to go back to the prior setting, the only necessary operation is to simply
adjust the frequency back to 8.350MHz from 101.7MHz. Following this
operation, KC908 would restore demodulation setting to USB with 3KHz
bandwidth automatically.
The partition of frequency is shown below:
Number
1
2
3
4
5
Frequency Range(MHz)
Begin(included)
0
1.8
28
30
76
End(excluded)
1.8
28
30
76
108
Note
Long wave,
medium wave
short wave
shor wave CB
FM Radio
Advertisement
Table of Contents
