Table of Contents
Advertisement
There are two ports inside the KC908, which are used to input and output
the reference clock signal. Clock frequency 20MHz, IPX type connector, at the
down right corner under the back case.
2.6 GPS Receiver (18.6GHz model only)
There is a built-in GPS receiver designed to receive time and position
signals. To enable GPS function, turn the GPS setting to on in the system
setting menu. After this function is turned on, there will be a blinking satellite
icon on the top of the screen, which indicates that GPS is turned on but not
locked. After GPS is locked, the blinking icon will become constantly on.
The position and time data GPS received can be accessed in the horizon
interface in APP menu. Also, these data can be attached to the data tables to
be stored or to the screenshots. To attach positional data in screenshots,
simply turn on the screenshot info attaching option in the system setting.
The reference clock of KC908 cannot be tamed by GPS.
The system clock can be synced with GPS. After GPS is locked, navigate to
FUNC-TIME setting, and click sync to GPS.
GPS Antenna
The left port of KC908 can be used as input port for GPS antenna. A GPS
antenna needs to be connected before using GPS functions. After GPS
function is enabled, the left port will be locked and it's no longer available to
the measuring functions of the machine.
Advertisement
Table of Contents
