Table of Contents
Advertisement
(4) Peak Table
This function is meant for searching strong signals within spectrum
automatically and log them into a table.
While the top 100 strong signals have been logged, only 10 of them are to
be displayed. Only signals meet the criteria set by the user would be logged.
Save table function is meant to save the peak table to the receivers. With a
TF card equipped, the table would be saved to TF card simultaneously. In
receiver mode, the saved table can be accessed.
Pay attention that each time the current table is saved, the former saved
table will be overwritten. This happens in the built in storage, but would not
happen in the TF card(would be stored as new file instead). Saved tables in the
TF card can be accessed in receiver mode, and after this operation the peak
list stored in the built-in memory would be overwritten.
Advertisement
Table of Contents
