Table of Contents
Advertisement
KC908 is designed to be operated with both hands. Hold the machine with
both hands and use thumbs to operate the keyboard. To operate the rotary
knob, hold the right part of the machine with right hand and rotate the knob
with lefr thumb. With baldric attached, it's possible to opearate with single
hand.
There are mounting points at both top and bottom part of the apparatus
to mount the baldric. Each mounting point, with a maximum bearable force of
100N, is design to withstand the weight of the whole machine. The breaking
force of the new baldric is 550N, which is tested in real-world scenario.
The mounting point is narrow, while the baldric is quite thick. While
installation, gadgets like tweezer could be used for assistance. Also, user can
shape the leading part of the baldric using fingers, to make it easier for the
baldric to cross the mounting point.
It is advised to use those two lower mounting points, to make the
apparatus in a upside-down position. As for operation position, simply hang
the baldric behind the neck and put the machine in front of stomach with its
screen facing outside. If the machine is picked up in this position, the panel
would face the user.
With those two upper mounting points being used, the screen should be
faced inside towards the stomach. However, in this position, user's body
would probably get stabbed by the connected antenna if the user falls, thus
Advertisement
Table of Contents
