Table of Contents
Advertisement
For quick operation, The common menu function set to the second layer
key, press SHIFT key to access. Following is the first layer of keyboard:
CENT Set the central frequency
SPAN Set the horizontal scanning width
LEV setting the vertical level parameter(REF, gain)
MARK Enable marker
MODU receiver mode: setting the demodulation parameter
Spectrum mode: setting the MAKER
AF
receiver mode: setting parameter about audio
spectrum mode: setting the span parameter(same as span setting in RF/CF)
HOME Selecting functions, switching between function selection menu and
current main page
RUN/STOP start and stop measurement. It will save power in stop situation
FUNC
system setting
PWR
power switch
SHIFT
press to access second layer keyboard(functions)
RB
nor the pass data would
PTTx
Transmitting button to start signal source ouput.
MONI
Press and hold to disable all squelching temporarily, release
to reenable
Hard reboot, neither the current settings would be saved,
be erased.
Advertisement
Table of Contents
