Boot And Shutdown - Deepace KC908 Manual

5.1 Boot and Shutdown

The POWER button on the lower left part of the keyboard is used to
boot/shutdown, while the RB button is used for hard-reboot.
The POWER button would only be functional after being pressed for more
than half a second.
Parameters would be stored before each shutdown and restored after
each boot.
After RB button is pressed, the power of the machine will be cut
completely. The power will recover and the machine will boot up after RB
button is released. Since the power is directly cut, the unsaved parameters will
be lost, while the saved ones will survive. The RB button on the keyboard is
not designed to reset the machine to factory default. For this function,
navigate to the FUNC menu and proceed.
The machine comes with a scheduled shutdown capability, and it can be
set in FUNC menu.
FUNC→system settings→scheduled shutdown
For example, if this setting is set to 30min, then a 30-min time period
without any operation would shut the machine down. Any operation
interrupting the countdown would restart the countdown.
To disable this function, input "0" or shorten the time parameter using the
knob until "off" is displayed on the screen.
All settings will be saved before executing scheduled shutdown.