Table of Contents
Advertisement
Pic : Four markers in spectrometer. Capable of moving to different tracks
and enabling substraction and field strength calculating function.
To receiver, this function is meant to switch to receiver mode, and set the
marker frequency as the receiving frequency. With auto-peaking function
enabled, the marker would stick to the peak spectrum line instantaneously.
MARKER button is used as the shortcut to enter the marker menu.
(3) Tracks
Two tracks, track A and track B can be enabled in the menu. Also, options
like maintaining max/min value are available in the menu. These functions are
mainly used for comparing spectrums and capturing instantaneous signals.
The REF setting of track A and track B can be different, while other parameters
remain the same.
Advertisement
Table of Contents
