Screen Assembly; Smv Assembly - Yetter 3400 Series Operator's Manual

SCREEN ASSEMBLY

1. Assemble the screen brackets to the screen with four 3/8 x 1" bolts, lock washers,
and nuts.
2. Mount the screen assembly to the main frame as shown with two u-bolts, lock
washers, and nuts. Additional screens can be ordered if desired.
CAUTION:
SECURED AND PROPERLY INSTALLED.

SMV ASSEMBLY

1. Mount SMV emblem as shown with point of triangle up as near operators left of
center as possible. Face so emblem is visible from rear of equipment.
12
ASSEMBLY
DO NOT OPERATE ROTARY HOE UNLESS SCREEN IS