Mounting The Battery Module - Hitachi CMU Series User Manual

3.2.2 Mounting the battery module

The battery module (model LQZ500) must always be mounted next to a model-LQP525 or
LQP527 CMU module on the mount base. Its mounting position may be either the left or right
to that CMU module.
If the module emits smoke or foreign odor, immediately switch off the power
supply and investigate the problem cause.
Do not perform any installation, wiring, handling, or internal modification
procedures other than stated in this manual. In no event will Hitachi be
responsible for personal injury or death or any damage to Hitachi's product or
peripheral equipment arising out of the use of such an unauthorized
procedure.
While the power is applied, never touch a terminal strip or connector pin. If
you touch a terminal strip or connector pin while the power is applied, you may
receive an electric shock.
WARNING
3-3
3 MOUNTING AND WIRING