Chapter 3 Installation
3.1
Mounting Module
(1) Mounting
Figure 3.1-1 Mounting Module
(2) Removing
③
Figure 3.1-2 Removing Module
②
①
①
②
3 – 1
1] Hook the lower part of the module to the hole in
the base.
2] Press in the upper side of the module until it clicks.
Note 1: Make sure the module is mounted securely.
Note 2: Slot position of power supply module is
fixed as 1st slot of base unit.
Note 3: Slot position of CPU module is fixed as 2nd
slot of base unit.
Modules can be fixed firmly by M4×10mm screws.
1] Press the lock button.
2] With the lock button pressed, pull the top of
the module.
3] Pull the unit away from the base unit.
Note: Press the lock button for a power supply
module.