Hitachi CMU Series User Manual page 109

6 MAINTENANCE
<Non-fatal log>
(Pattern 1)
[*] ******* (UNO=**,DEV=0x********) (TN=***) (SLOT=**)
① ②
Program error
Macro parameter check error
PI/O error
I/O error
WDT timeout error
Module error
Kernel warning
Kernel information
System failure (kernel trap)
System failure (built-in sub-stop)
ADT error
Memory error
System bus error
Message frame error
Buffer status report
Socket error
Transfer area duplication error
① Fault severity classification
[F]: Fatal error
[E]: Error
② Error message
See Table 6-6, and refer to "SOFTWARE MANUAL OPERATION NX/ACP-S10V
(Manual number SVE-3-134)." For error codes that are not enumerated in the error
message list, the default error messages shown in Table 6-5 appear.
③
Table 6-4 Non-Fatal Log Error Message Format List
Format type
[W]: Warning
[I]: Information
④ ⑤
Error message format
① + ② + ④
① + ② + ④
① + ② + ④ + ⑤
① + ② + ③
① + ②
① + ② + ⑤
① + ② + ④
① + ② + ④
① + ②
① + ②
① + ② + ④
① + ② + ④
① + ② + ⑤
① + ②
① + ②
① + ②
① + ②
6-8