Table of Contents
Advertisement
Log number 021: (LSI) Collision errors between sending (two or more)
The number of times more than one collision was detected during transmission.
Log number 022: (LSI) Collision error between sending (once)
The number of times a single collision was detected during transmission.
Log number 023: (LSI) Delay between sending
The number of delays that occurred during transmission, where each transmission was
terminated normally.
Log number 024: Frame-send-timeout
The number of frame-send-timeouts that occurred.
Log number 129: Adapter state (top 2 byte), LINK, 10M/100Mbps, Full duplex / half-
double state (bottom 2 byte)
Data communication speed and full-duplex/half-duplex state of the ET.NET module
used. Interpret this information according to the following table:
Connection type
10 Mbps
100 Mbps
(*) If a connection is not established over the communication
line, the displayed value will be 0 (fixed).
Hexadecimal
Half-duplex
00000001
Full-duplex
00000005
Half-duplex
00000003
Full-duplex
00000007
6-43
Displayed value (*)
Decimal
1
5
3
7
6 MAINTENANCE
Advertisement
Table of Contents
