Assembly - Weider FLEX-CTS WESY20318.0 User Manual

ASSEMBLY

• To hire an authorized service technician to
assemble the home gym, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, assemble the
home gym in the location where it will be used.
Make sure that there is enough clearance to walk
around the home gym.
• Place all parts in a cleared area and remove
the packing materials. Do not dispose of the
packing materials until assembly is finished.
1. Go to my.weiderfitness.com on your
computer and register your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
Note: If you do not have internet access, call
Customer Care (see the front cover of this
manual) and register your product.
2. Attach the Stabilizer (59) to the Upright Base (1)
with two M8 x 55mm Bolts (45), two M8 x 35mm
Washers (35), and two M8 Locknuts (42).
Then, attach the Pad Tube (58) to the Upright
Base (1) with two M6 x 15mm Screws (47).
• For help identifying small parts, see page 6.
• The following tools (not included) may be required
for assembly:
one adjustable wrench
one rubber mallet
one Phillips screwdriver
Assembly may be easier if you have your own
set of wrenches. To avoid damaging parts, do not
use power tools.
1
2
58
42
59
7
1
42
47
35
45