Adding Dishwasher Salt - Hanseatic HGTI6082E127735BS User Manual

Dishwasher detergents, rinse aids and dishwasher salts
1. Turn the cover of the rinse aid dispens-
er (20) a quarter turn in an anticlockwise
direction and remove it.
2. Fill the water tank to the "max" mark in the
opening. The adjacent inspection window
turns black.
3. Wipe away any rinse aid which has spilt
immediately so that you don't compro-
mise the rinsing results and to avoid in-
creased foaming.
4. We would recommend that you do not
change the dosage that was set by the
factory initially. Only correct the dosage if
you are not satisfied with the rinsing re-
sults (see below).
5. Place the dispenser cover back over the
opening and rotate it clockwise to close it.
Changing the rinse aid dosage
If the dishes are
– dull and stained, increase the dosage by
turning the arrow on the rinse aid dispens-
er (20) to a higher value.
– sticky and smeared, decrease the dosage
by turning the arrow on the rinse aid dis-
penser (20) to a lower value.

Adding dishwasher salt

Risk of damage!
You may damage the appliance and
(20)
its stainless steel surface by using dish-
washer salt in an improper manner.
■ Only use dishwasher salt which is spe-
■ Always wipe away split dishwasher
■ Immediately after adding the dish-
– if you are only using multitabs which al-
– if the water hardness in your area is in the
Add dishwasher salt:
– prior to using the appliance for the first
– if the "Add dishwasher salt" indicator
1. Remove the lower dish rack (16).
2. Turn the cover on the dishwasher salt dis-
3. Upon first use: Add 1.5 l water to the dish-
NOTICE
cifi cally intended for dishwashers.
salt immediately with a damp cloth.
washer salt, launch a dishwashing
programme.
You do not need to add dishwasher salt
to the dishwasher salt dispenser
ready contain dishwasher salt,
0–5° dH range.
time,
lights up.
(19)
penser (19) anticlockwise and remove it.
washer salt chamber so that it doesn't
clump.
Page EN-15
(13)