Leica GPS1200 Series Manual page 85

7.2.2 Mean Page
Description
Averaging
Manage...\Data
Various measured coordinate triplets for one point can be recorded using the same
point ID. If the averaging mode is activated, an average is calculated.
It is checked if the deviations of each single point are within the configured limits.
After averaging, the Mean page becomes available in MANAGE Edit Point: Point
ID and accessible from the Survey application program SURVEY Survey: Job
Name, Survey page.
Defining the averaging mode and configuring the limits
The averaging mode and the limits are configured in MANAGE New Job, Avge
page or in MANAGE Edit Job: Job Name, Avge page. Refer to "6.2 Creating a New
Job/Editing a Job".
Description of averaging modes
Averaging Description
mode
Average The horizontal and height distances from the measured points to
the average are computed and displayed on the Mean page.
GPS1200 7-12