Leica GPS1200 Series Manual page 134

Coding
9.4 Code and Attribute Mismatch
Description
XX
Point Code
Mismatch
Code/attribute mismatch for points is explained in this chapter. Code/attribute
mismatch for lines and areas is identical to code/attribute mismatch for points. For
simplicity, the word point is used.
If a point with the same point ID exists in the job, the codes, the attribute names and
the attribute values of the new and the existing point must be identical. Should they
not be identical, a screen opens where the code/attribute mismatch can be
corrected. One point cannot have different codes/attributes.
GPS1200
STORE (F1)
To store the highlighted code and any
associated attributes with the point
being stored and to continue with the
application program or data manage-
ment.
9-19