Leica GPS1200 Series Manual page 164

Convert...\Export Data from Job
13.2 Exporting Data
Requirements
Access
EXPORT
Export Data from
Job
At least one format file was created using LGO and has been transferred to the
System RAM.
Select Main Menu: Convert...\Export Data from Job.
GPS1200
CONT (F1)
FILT (F4)
IFACE (F5)
To export the data.
To set the sort and filter settings for
export. The setting for <Sort:> on the
Points page defines the order in
which points, lines and areas are
exported. The setting for <Filter:> on
each page defines which points, lines
or areas are exported.
Available for <Export To: RS232>.
To choose the port and device to
which the data should be exported.
13-3