Husqvarna 27007908000 Information page 4

Scope of supply

1x tank lid cover

4x screws M3x6
Assembly

- Lift plug on the fi ller cap and insert the ignition key.
- Turn the ignition key 90° counterclockwise and take off the fi ller
cap.

- Remove screws .
- Take off the original cover.

- Position tank lid cover (included) on the fi ller cap.
NOTE:

Plate can be removed. It is only needed with the original cover!

- Mount and tighten screws (included).
- Put the fi ller cap back on and turn the ignition key 90° clockwise.
- Remove the ignition key.
4