How To Hang Your Ceiling Fan - Emerson TILO CF130BS00 Owner's Manual

Installing the Ceiling Cover on the
Fan Motor Housing
(For Close-to-the-Ceiling Mounting)
NOTE: The decorative lower cover, coupler cover
and hanger ball assembly are not needed for close-
to-the-ceiling mounting.
1. Remove and retain three screws from the top of the
motor housing (Figure 9).
2. Position the rubber gasket (supplied in parts bag) on
the motor housing (small holes in gasket cenered
over the screw holes in the housing) Figure 9.
3. Position the ceiling cover onto the top of the motor
housing and reattach the three screws previously
removed (Figure 10).
Please call Emerson
1-800-654-3545 if you have any questions
about installation and operation of this ceiling fan.
WARNING
!
The fan must be hung with at least 7' of clearance from
floor to blades (Figure 11).
WARNING
!
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
outlet box listed as "Acceptable for Fan Support of
22.7kg. (50 lbs.) or less".
WARNING
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked "Acceptable for
Fan Support of 22.7kg. (50 lbs.) or less", and use
screws supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are not
acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
Ceiling Fan Assembly
technical support

How to Hang Your Ceiling Fan

(continued)
Figure 9
at
Figure 10
AT
LEAST
7'
Figure 11
8
REMOVE AND RETAIN
3 SCREWS
(every other one)
RUBBER GASKET
MOTOR
HOUSING
CEILING
COVER
SCREW (3)
RUBBER
GASKET
CEILING
FLOOR
U.L. Model No.: CF130