Consumer Warranty - ResMed Pixi User Manual

Technical specifications
Therapy
pressure
Compliance
Resistance
Sound
Environmental
conditions
Gross
dimensions
Notes:
• The mask system does not contain PVC, DEHP or phthalates.
• This product does not contain natural rubber latex.
• The manufacturer reserves the right to change these specifications without notice.
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any length of time.
Store the mask in a dry place out of direct sunlight.
Disposal
This mask does not contain any hazardous substances and may be disposed of with your
normal household refuse.
Symbols
Caution, consult accompanying documents;
Catalogue number;
REF
Does not contain natural rubber latex;
Representative;
explains special measures for the safe and effective use of the device;
from rain; This way up;

Consumer warranty

ResMed acknowledges all consumer rights granted under the EU Directive 1999/44/EG
and the respective national laws within the EU for products sold within the European
Union.
2 to 30 cm H O
2
Mask compliance between 5 cm H
1.57 mL/cm H O
2
Drop in pressure measured (nominal)
at 50 L/min: 0.8 cm H
at 100 L/min: 3.1 cm H
DECLARED DUAL -NUMBER NOISE EMISSION VALUES in
accordance with ISO 4871. The A-weighted sound power level of the
mask is 40.6 dBA, with uncertainty 4 dBA. The A-weighted sound
pressure level of the mask at a distance of 1 m is 32.6 dBA, with
uncertainty 4 dBA.
Operating temperature: +5°C to +40°C
Operating humidity: 15% to 95% non-condensing.
Storage and transport: -20°C to +60°C
Storage and transport humidity: up to 95% non-condensing.
Mask fully assembled with elbow assembly – no headgear.
35 mm (H) x 430 mm (W) x 40 mm (D)
Temperature limitation;
Indicates a Warning or Caution and alerts you to a possible injury or
Fragile, handle with care.
O and 15 cm H
2
O
2
O
2
Batch Code;
LOT
Humidity limitation;
Manufacturer;
8
O is less than
2
European Authorised
Keep away