Calibration - Siemens 7KG85 Series Product Information

Connection
H: N / -
H: L / +
J
Z
14

Calibration

WARNING
Warning - accidents can occur by using inappropriate
tools
Non-observance may lead to death or serious
injury.
When carrying out work, it is essential that you observe
the regulations and instruction guidelines of accident
prevention regulation BGV A3. Use appropriate power
tools.
The device comes calibrated from the factory, and it
does not have to be calibrated again throughout its
entire operation period. The calibration is only carried
out if necessary due to internal requirements.
For a detailed description of the device calibration, see
the device manual of SICAM P850/P855, order number
E50417-H1040-C482.
SICAM P850/P855 7KG85xx, Product Information
E50417-B1050-C482-A3, Edition 03.2013
Function
N/- Neutral of the mains voltage/
negative supply voltage
ph/+ Phase of the mains voltage/
Positive supply voltage
RS485
Serial interface (if available in
the device version)
Ethernet Ethernet connection; on the top
interface side of the housing
Description
31