Safety - VAN DER ENDE Vacon 100 Flow Manual

1 Safety

ONLY QUALIFIED TECHNICIANS MAY CARRY OUT WORK
WARNING
10
ON THE ELECTRICAL INSTALLATION
The components of the power unit of the frequency
converter are live when the Vacon 100
is connected to the mains. Contact with this live voltage is
1
extremely dangerous, and can result in serious injuries or
death.
The control unit is potential-free.
The Vacon 100 has a leakage current of 3.5 mA AC according
2
to EN61800-5-1.
If the frequency converter is part of a machine, the machine
3 manufacturer is responsible for installing a main switch for
the machine (EN 60204-1).
4 Only spare parts supplied by Vacon may be used.
The motor cables must be disconnected from the frequency
5 converter before insulation and other measurements are
carried out on the motor or motor cables.
Do not touch the IC-circuits on the boards.
6
Static voltage can damage the components.
Check that the EMC level of the frequency converter
7 corresponds to the required value as determined by the
environment.
The motor starts automatically if you set the parameter
setting
8
(ID 731) 'reaction after an error message' to automatic. Read
more about this in the application manual.
The Vacon 100 frequency converter must be used for
9
permanent installations.
Be aware that the frequency converter can start
automatically when it is connected to the power supply. To
prevent this, unplug the motor from the frequency converter
if sudden starting might be hazardous.
Vacon 100 Flow 4
page