Table of Contents
Advertisement
Front Panel Control and Display
Select Set Gateway and press Enter:
Use the left/right buttons to move the cursor along the numbers, and the up/down keys to change the
numbers to the required Gateway address. Press the Top Left button to Apply.
If you want the server to select an IP automatically, you can switch DHCP on by selecting the
Auto/IP/DNS/Gway option:
Press Enter to switch to automatic selection.
Note: You may need to use this setting if you want your server to temporarily switch networks to, for
example, allow access to the internet. To switch back to a static IP, and switch DHCP off, you should set the
IP/DNS/Gateway manually, following the steps above as required.
Service Mode
Note: Service Mode is only available/required on Embedded Servers. From Delta Monitor v. 3.0 it is no
longer necessary to put the server in Service Mode to change NICs.
This function allows you to cycle in and out of service mode on an Embedded Server.
Hardware Operation
53
© 2020 7thSense Design
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Delta Media Server and is the answer not in the manual?
Questions and answers