Using The Alarm; Setting An Alarm; Stop The Alarm; Snooze - Bush 4023856 Instruction Manual

Using the Alarm

Setting an alarm

Note: Check that the radio has the correct time and date before you set an alarm.
There are 2 alarm settings available.
1. Press and release the 'Alarm' button, 'Select Alarm <1> 2' is displayed. Use the
'Tune/Select' rotary control to scroll to Alarm 1 or Alarm 2 and press to 'Select'.
2. 'Alarm status ON <OFF>' is displayed. Use the 'Tune/Select' rotary control to scroll
to ON or OFF and press to 'Select'.
3. 'Alarm on hour' is displayed and the hour digits for the alarm will flash. Use the
rotary control to scroll to the hour for the alarm. Press the rotary control to
'Select'.
4. 'Alarm on minutes' is displayed and the minutes for the alarm will flash. Use the
rotary control to scroll to the minutes for the alarm. Press the rotary control to
'Select'.
5. 'Alarm duration ' is displayed. Use the rotary control to scroll to the duration for
the alarm. You can choose from 15, 30, 45, 60 and 90 minutes. Press the rotary
control to 'Select'.
6. Use the rotary control to scroll to the frequency for the alarm. You can choose
from Once, Daily, Weekdays and Weekends. Press the rotary control to 'Select'.
7. Use the rotary control to scroll to the sound source for the alarm. You can choose
from BUZZER, DAB or FM. Press the rotary control to 'Select'.
8. 'Alarm Set OK' is displayed and a clock icon together with the digit '1' or '2' will
appear in the bottom left of the display to confirm that an alarm has been set.
Note: The alarm volume will increase progressively until it reaches the same
volume that you have set for the radio.

Stop the alarm

When the alarm sounds press and release the 'Power' button. Alternatively, you can
press and release the 'Snooze' button to 'Snooze' (see Snooze function below).
Note: If you press the 'Power' button to stop the alarm, the alarm symbol will remain in
the display and the alarm will sound again at the same time the next day unless it was
set for 'Once' only.

Snooze

When the alarm sounds press and release the 'Snooze' button to Snooze. The radio
will return to standby mode and 'Snooze' will flash in the bottom left of the display.
The alarm will sound again in approximately 9 minutes.
16