Table of Contents
Advertisement
Using your Mono DAB/FM Radio
Let's get started
Tune to an FM preset station
In FM mode:
1. Short press the Preset button. Preset Recall <1:> is displayed together with the name or
frequency of the station stored there, or (Empty) if no previous station has been stored.
2. Use the Prev or Next button to move to the Preset location and station that you would
like to listen to (1-10).
3. Short press the Select button. The radio will instantly tune to that station and begin to
play.
Note: If no FM station has been stored under the preset button, 'Preset Empty' will be
displayed, then the radio will revert to the previously selected radio station.
FM display information
When listening to an FM station you can change the information that will appear on the
second line of the display.
•
Radiotext (RT) - This is scrolling text information supplied by the broadcaster.
Information could be the name of an artist or music title, DJ's name, contact details
for the radio station etc.
•
Program Type (PTY) - Such as 'Rock' , 'Pop' , Talk' or 'News'
•
Station name or frequency - Such as BBC R4 or 93.30MHz
•
Audio mode – Mono
•
Power source - Mains Power or Battery
•
Time and date - Supplied by the broadcaster.
1. Repeatedly short press the Menu/Info. button to cycle through the different
information options.
28
Using your Mono DAB/FM Radio
Using your Mono DAB/FM Radio
Let's get started
Setting the alarm
Note: Check that the radio has the correct time and date before you set an alarm.
1. Long press the Menu button to enter the menu options.
2. Short press the Prev button to scroll to <System>. Short press the Select button.
3. Short press the Next button to scroll to <Alarm>. Short press the Select button. Alarm
1 Setup is displayed (Short press the Next button to set Alarm 2). Short press the Select
button.
4. Alarm 1 Wizard On time is displayed and the hour digits for the alarm will flash.
5. Use the Prev or Next button to scroll to the hour for the alarm and short press the
Select button.
6. The minutes will now flash. Use the Prev or Next button to scroll to the minutes for the
alarm and short press the Select button.. The duration time will now flash.
7. Use the Prev or Next button to scroll to the duration for the alarm and short press the
Select button.. You can choose from 15, 30, 45, 60, 90 and 120 minutes. Short press
the Select button. The source for the alarm will now flash.
8. Use the Prev or Next button to scroll to the sound source for the alarm. You can
choose from Buzzer, DAB or FM. Short press the Select button.
Note: If you select DAB or FM radio for the alarm source, 'Last listened' will flash in the
display. Short press the Select button and the last listened to radio station in DAB or FM,
as appropriate, will be used for your alarm.
9. Use the Prev or Next button to scroll to the frequency for the alarm. You can choose
from Daily, Once, Weekends or Weekdays. Short press the Select button.
Note: If you select 'Once' , you will then be prompted to set the date for your alarm.
10. Short press the Prev or Next buttons to set the volume for your alarm. Short press the
Select button.
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
29
Using your Mono DAB/FM Radio
Advertisement
Table of Contents
