Setting Alarm 1 (Or 2); Stop The Alarm - Bush WO321 Instruction Manual

Using your Stereo FM Radio
Let's get started

Setting Alarm 1 (or 2)

Note: Check that the Radio has the correct time before you set an alarm. Please
remember to use 24 hour clock.
1. Long press the Alarm button. 0:00 or the time of the last alarm you set, will be
displayed.
2. A small bell icon with a '1' or '2' digit inside will appear in the bottom left hand part of
the display. Use the left hand rotary control to choose to set Alarm 1 or Alarm 2. Short
press the Alarm button to select.
3. 'rA' will be displayed to indicate that the radio will be used as the sound source for
your alarm. Use the left hand rotary tune control to choose from 'bb' for the buzzer or
'rA' for the radio as the sound source for your alarm. Short press the Alarm button to
select.
4. The hour will flash. Use the left hand rotary control to set the correct hour for your
alarm. Short press the alarm button to Select.
Note: Please remember to use 24 hour clock for your alarm settings.
5. The minutes will flash. Use the left hand rotary control to set the correct minutes for
your alarm. Short press the alarm button.
6. 'OFF' will be displayed. Use the left hand rotary control to display 'ON' . Short press the
alarm button. A small bell icon with a '1' or '2' , as appropriate, will be displayed in the
bottom left hand part of the display in both Radio and Standby mode, confirm that an
alarm has been set.
Note: Remember to set the Radio volume, to one that will wake you.

Stop the Alarm

When the alarm sounds, short press the Power button to turn off the alarm. Alternatively,
you can short press the Snooze button (see Snooze function below).
22
Using your Stereo FM Radio