Bush LATITUDE SERIES Manual

Bush LATITUDE SERIES Manual

Dab+/fm digital radio

Advertisement

LATITUDE SERIES
DAB+/FM DIGITAL RADIO
LATITUDE SERIES
The Gold Technical Support Line: 1902 215 259
(Charges will apply at $2.95 per minute)
www.bushaustralia.com.au

Advertisement

Table of Contents
loading

Summary of Contents for Bush LATITUDE SERIES

  • Page 1 LATITUDE SERIES DAB+/FM DIGITAL RADIO LATITUDE SERIES The Gold Technical Support Line: 1902 215 259 (Charges will apply at $2.95 per minute) www.bushaustralia.com.au...
  • Page 2: Table Of Contents

    LATITUDE SERIES Introduction and Contents Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions.
  • Page 3: Safety Instructions

    LATITUDE SERIES Safety Instructions Ensure that you read all of the safety instructions before using this unit. Safety Considerations  Position the power cable and other connected cables so that they are not likely to be walked on, pinched or where items can be placed on or against them.
  • Page 4: Dab+ Radio And Battery Operation

    LATITUDE SERIES DAB+ Radio and Battery Operation POWER Button SCAN Button Headphone Jack Button MODE Button DC Jack Button MENU Button Aerial INFO Button PRESET Button Battery Compartment SELECT Dial LCD Display Control DAB+ and FM Press the POWER Button to turn the radio on or off.
  • Page 5: What Is Dab

    LATITUDE SERIES What is DAB+ DAB+ was developed in Europe by a consortium of broadcasters and manufacturers. DAB+ uses digital compression techniques to transform the source material, i.e. music and speech, into better quality audio. Interference free reception Analogue systems suffer from an effect called “multipath distortion”. This is caused because waves do not behave in an orderly fashion, but bounce and reflect off buildings etc.
  • Page 6: Getting Started

    LATITUDE SERIES Getting Started Carefully remove your DAB+ Receiver from the box. You may wish to store the packaging for future use. In the Box Inside the box you will find:  DAB+ Radio (Main Unit)  Power Adapter ...
  • Page 7: Volume Control

    LATITUDE SERIES Getting Started  Note: When you turn on the radio it will automatically search and store all available stations. You should conduct an additional Full Scan to ensure all stations are picked up and stored. It is recommended every few months to run a new scan to pick up any new DAB+ broadcasts that may have begun broadcasting after purchasing your DAB+ radio.
  • Page 8: Using Dab+ Radio

    LATITUDE SERIES Using DAB+ Radio Display the Signal Strength  Note: Stations with signal strength below the minimum signal level will not provide a steady stream of audio. 1. Refer to the method of ‘View Station Information’ outlined on the previous page to activate ‘Signal Strength’. A signal bar will be displayed as shown below.
  • Page 9: Setting Station Presets

    LATITUDE SERIES Using Presets Setting Station Presets  Note: The process for setting presets is the same for DAB+ and FM Radio stations. Your radio can store 10 DAB+ & 10 FM station presets. Make sure that you are not in the menu when you are attempting to set a preset.
  • Page 10: Using Fm Radio

    LATITUDE SERIES Using FM Radio 1. Press the MODE Button to switch to FM Mode from DAB+ Mode. 2. Once in FM mode, the radio will play from the beginning of the FM frequency range (87.50MHz) or will play the last FM station that you were listening to.
  • Page 11: System Settings

    LATITUDE SERIES System Settings System Settings Set Time 1. Press MENU Button Turn the SELECT dial to < System>  Press the SELECT dial to enter the Time menu. and then press the Button to view options as below:  <Set 12/24 hour format>: Select between ‘Set 24 hour’ and ‘Set 12 hour’...
  • Page 12: Set Alarm

    LATITUDE SERIES Troubleshooting and Technical Specification Set Alarm  Note: Ensure that the time is set correctly before you set one of the Alarms. The process to set an alarm is as follows: 1. Press the MENU Button < System >  < Alarms >.
  • Page 13: Troubleshooting And Technical Specification

    Troubleshooting If a fault occurs, check the points listed below before contacting the Bush Warranty line or taking the radio for repair. If you are unable to remedy a problem by following these suggestions, please consult your retailer or service professional.
  • Page 14: Warranty

    In the unlikely event that your product fails to work normally, please contact Bush Warranty on 1800 509 394 (Australia) or 0800 450 259 (New Zealand) & have your receipt of purchase on hand.
  • Page 15 LATITUDE SERIES PO BOX 6287 Silverwater NSW 1811 www.bushaustralia.com.au...

Table of Contents