Using The Dab Radio; Telescopic Aerial; Dab Radio Mode; Changing Dab Stations - Bush 4023856 Instruction Manual

Using the DAB radio

Telescopic aerial

Please make sure that the aerial on the top of the Radio is fully extended and adjusted
before you attempt to tune to a DAB radio station (a vertical position is recommended).
This will ensure that the maximum signal strength is available when the Radio begins
to scan. Extending the aerial also ensures the best possible sound quality.

DAB radio mode

Check that your Radio is in DAB radio mode. If you are not already in DAB mode,
briefly press and release the 'DAB/FM' button until you are in DAB mode (check the
display). The DAB/FM button can be found on the front of the radio, underneath and
to the right of the display.
The first time you use the Radio or if the station list is empty, your radio will
automatically begin to scan for DAB radio stations. A progress bar will show the
progress of the scan and the number of stations found during the scan will also be
displayed.
When the scan is complete your radio will select the first available station and begin to
play. Stations are listed in numerical and then alphabetical order by default.

Changing DAB stations

In DAB mode:
1. Turn the rotary 'Tune/Select' control on the front of the radio to scroll through the
available stations.
2. When the station that you would like to listen to is displayed press to 'Select'.
There will be a short delay whilst your DAB radio tunes to your selected station.

Scanning for DAB stations

With DAB radio, additional stations and services regularly become available so it's a
good idea to carry out a manual scan every now and then to make sure that you have
the most up to date station listing stored within the memory of your Radio. If you have
moved your Radio to another location,
e.g.: if you go on holiday, then it's also a good idea to carry out a manual scan.
In DAB mode:
1. Press and release the 'Scan' button to begin a search for stations. The display will
change to 'Scanning...'. A progress bar will show the progress of the scan and the
number of stations found during the scan will also be displayed.
9