Table of Contents
Advertisement
Software version
In Standby mode:
1.
Press and release the 'Menu' button to enter the settings menu.
2. Use the 'Tune/Select' rotary control to scroll to '<MCU SW Version>'. Press and
release the rotary 'Tune/Select' control to display the software version.
3. Press and release the 'Menu' button to return to the standby clock display.
Display language
You can change the display language of your radio, there are 4 options available;
English, French, German and Italian. The current setting will have an '*' in the top right
of the display.
Your radio must be switched on (not in Standby mode) when you change the display
language.
1.
Press and release the 'Menu' button.
2. Use the 'Tune/Select' rotary control to scroll to '<System>'. Press the rotary control
to 'Select'.
3. Use the 'Tune/Select' rotary control to scroll to '<Language>'. Press the rotary
control to 'Select'.
4. Use the rotary control to scroll to the display language you would like. Press the
rotary control to 'Select'.
5. Note: As soon as you select a different display language, all of the display
information will be in this new language.
6. Press and release the 'Menu' button to return to the station display.
Factory reset
You can reset your radio and restore all of the original factory settings.
Note: If you reset your radio all of your DAB and FM station presets will be deleted.
1.
Press and release the 'Menu' button.
2. Use the 'Tune/Select' rotary control to scroll to '<System>'. Press the rotary control
to 'Select'.
3. Use the 'Tune/Select' rotary control to scroll to '<Factory Reset>'. Press the rotary
control to 'Select'.
4. 'Factory Reset? <No> Yes' will be displayed. Use the rotary control to scroll to
'<Yes>'. Press and release the rotary control to confirm.
5. There will be a short delay and then 'Scanning...' will be displayed whilst your radio
automatically scans for DAB stations.
A progress bar will show the progress of the scan and the number of stations found
during the scan will also be displayed.
When the scan is complete your radio will select the first available station and begin to
play. Stations are listed in numerical and then alphabetical order by default.
19
Advertisement
Table of Contents
