Graco EFR Instructions-Parts List Manual page 63

Sending the sequence select bits is optional. If the sequence select bits are not sent, the EFR will use the current
selected sequence.
Automation Inputs (EFR Outputs)
Automation Outputs (EFR Inputs)
Trigger Signal (Foot Switch)
Sequence Select Bits (optional command)
Sequence Running
Key
EFR Sequence is running
EFR Sequence is being stopped
An OFF pulse on the system enable I/O pin will stop the sequence.
Sending the sequence select bits is optional. If the sequence select bits are not sent, the EFR will use the current
selected sequence.
3A6165J
System Ready
Alarm Active
Valve Signal
System Enable
EFR State
EFR Discrete Signal Stop Sequence
I/O Integration
63