Page 1
9 in. crescent or open end wrench - 7/8 in. • 9 in. crescent or open end wrench - 1 • Waste container • Thread tape Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 Copyright 2007, Graco Inc. is registered to I.S. EN ISO 9001...
Page 2
™ Replacing the EM5 Meter 1. Pull down enough hose so that the meter can be 2. Set air regulator pressure to zero psi and/or turn off supported on the floor or other flat work surface. main air supply. 3. Trigger the dispense valve into a waste fluid 4.
Page 3
™ Replacing the EM5 Meter 7. Connect the new meter swivel to the hose. 8. Using two wrenches, connect the swivel to the hose. Do not over tighten. 9. Slide the swivel cover over the swivel. 10. Turn on main air supply and/or set air regulator pres- sure to 60 psi.
Page 4
Meter All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. This manual contains English. MM 312354 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC.