Graco EFR Instructions-Parts List Manual page 49

size currently highlighted, or by pressing
will add a new shot size after the shot size currently
highlighted. To delete a selected shot size, press the
icon.
If the box next to a shot size is selected, the user must
activate the shot size from an external trigger source,
such as a foot switch. Until the trigger signal is received,
the EFR will wait before playing the shot size shown
beside the selected check box. Once the external trigger
is received, the EFR will proceed through the sequence.
3A6165J
If the user enters the home screen while a sequence
including a checked shot size is selected as the active
, which
sequence, the user must push the
bottom of the screen or supply an external trigger signal
(e.g. a foot switch or other manual switch) to begin dis-
pensing the sequence. After the sequence is started,
the stop
NOTE: If the active sequence does not contain a
checked shot size, the unit will start dispensing when
the icon or an external trigger signal is supplied.
The sequence will continue to dispense until finished.
ADM Screen Overview
and pause icons will appear.
icon at the
49