Table of contents Safety recommendations ......................... 3 EU Declaration of Conformity ......................3 1. Introduction ..........................4 Intended use ..............................4 Principle of operation ...........................4 2. Operating ..........................5 Using the headphones: ..........................6 Graphical streaming screen ........................6 Accessories to hold the sensor, the handset and grease gun ..............7 3.
Do not expose the equipment to high humidity Electromagnetic compatibility (EMC) - or direct contact with water. Part 4: Testing and measurement techniques. • All repair work should be performed by an SKF Section 3: Radiated, radio-frequency, repair shop. electromagnetic field immunity test. •...
1.2 Principle of operation The principle of operation of the TLGU 10 can be compared to a special microphone, sensitive only to high frequency ultrasounds. A sensitive piezoelectric crystal is used as a sensor element.
The remaining battery level is displayed The “x”-“sensor” indication will only disappear when here (1). the TLGU 10 is correctly wired up and connected to the correct probe. The device can be powered through its USB port (2) with an external power source (not provided).
2.1 Using the headphones: Once the correct amplification level is reached, the reading (measurement) will be displayed in green To enhance the hearing experience, the audio and a “smiley” :-) will appear in the place where volume of the headset can be adjusted by pressing previously the triangular amplification guidance icon the left and right arrows (5) until the sound level is was shown.
2.3 Accessories to hold the sensor, the handset and grease gun The SKF Ultrasonic Lubrication Checker TLGU 10 comes with a set of accessories to help the user in operation: please see photos below to see how to use them.
Neckband headset for TLGU 10 TLGU 10-HANDS Ultrasonic Lubrication Checker handset TLGU 10-PROBE Probe and its accessories TLGU 10-CRADLE Grease gun and magnetic cradle TLGU 10-CC Toolcase with inlay for TLGU 10 TDTC 1/C General toolcase without inlay, size C...
5. Appendix: FAQ (Frequently Asked Questions): • Q: How do I start using TLGU 10 on my • Q: What do the numbers mean when machine? going up? • A: Here is a typical scenario of usage of TLGU •...
Need help?
Do you have a question about the TLGU 10 and is the answer not in the manual?
Questions and answers