Dungs DMV Series Installation Instructions

DMV/6x2 Series
Coil Replacement
Installation Instructions
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Attention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Attention
Explanation of symbols
1, 2, 3 . . . = Action
• = Instruction
1 ... 2
USA CDN
The installation and maintenance
of this product must be done
under the supervision of an ex-
perienced and trained specialist .
Never perform work if gas pres-
sure or power is applied, or in
the presence of an open flame.
Please read the instruction be-
fore installing or operating . Keep
the instruction in a safe place . You
find the instruction also at www.
dungs .com If these instructions
are not heeded, the result may
be personal injury or damage to
property .
Any adjustment and application-
specific adjustment values must
be made in accordance with the
appliance-/boiler manufacturers
instructions .
[V] [A]
[Hz] [VA]
Safety
first
O.K.
Check the ratings in the speci-
fications to make sure that they
are suitable for your application .
On completion of work on the
safety valve, perform a leakage
and function test .