Features - Tree MRC2000 Operation Manual

 Display options: 44 digital LED
 Power: recharge/AC adapter 12V/1000mA
 Select LED brightness (selectable)
 Auto shut off (selectable)
 Operating Temperature: 5-35 °C
 Operating Humidity: 25%-95% RH
 Zero Range (4% to full capacity)
 Tare Range (50% to full capacity)
 Low battery will appear - charge
 Error message indication:
[Err-O] = Overload
[Err-Z] = Exceed zero track range when power is on
[Err-S] = Unstable when power is on
[Err-C] = calibration code is not enough or operation error
The Following are instructions of how to correctly use the weight scale:
The weighing scale may only be used for the weighing of solid-materials and of liquids
filled into secure containers.
The maximum capacity load of the weighing scale must never be exceeded, otherwise
the weighing scale may be damaged.
In using the weighing scale in combination with other devices as well as with devices
produced by other manufacturers, the appropriate regulations for the safe use of the
relevant attachments and their application in accordance with instructions must be
observed.
The weighing scale has been manufactured and tested in accordance with the
standards and recommendations set out in the declaration of conformity.
The power adapter supplied for the weighing scale complies with the appropriate
electrical protection class.
The following applies to Weigh Bar series
Power supply:
Input: 110 or 230V AC (+/-15-20%); 50 to 60Hz
Output: 12V DC 150mA
Rev 1, 11.15.2018

FEATURES

Application & Conformity
9