Assembly & Installation - Tree MRC2000 Operation Manual

The weighing machine is delivered in partly dismantled condition. Assemble the
individual components in the following sequence:
 Insert the power adapter cable plug into the socket at the rear of the balance.
Connecting the AC Adapter
The following Safety recommendations must be observed when connecting the balance:
Placement of Scale
The location in which the scale is placed is very important in order for the scale to work
to its full potential. Certain conditions can affect the capabilities of the scale, conditions
like: the presence of air flow, variations in temperature, and direct sunlight. Please
follow the recommendations given below in choosing a location to place your scale.
 Place the scale on a solid, firm and preferably vibration-proof, horizontal base
 Make sure that the weighing machine cannot be shaken or knocked over
 Protect from direct solar radiation
 Avoid drafts and excessive temperature fluctuations
 Avoid placing the scale near or on any magnetic surfaces
Rev 1, 11.15.2018
Assembly & Installation
11