Table of Contents
Advertisement
About this Operating & Integration Instructions
This Operating & Integration Instructions is the original and legally correct version.
The aim of this Operating & Integration Instructions is to provide the user all the necessary information to install,
operate and maintain LGD Compact Series Products.
This Operating & Integration Instructions must be read by all individuals that will be using or servicing this
device. System maintenance and service needs to be performed by qualified and Axetris AG approved
personnel only. The appropriate handling of the product is required for trouble-free operation. This product is
a high-precision measurement device. Careful installation and handling is necessary to achieve and maintain
the specified measurement precision. Correct set-up and operation of the instrument will allow you to use it
safely and to obtain reliable measurement results.
Any warranties regarding this product, and as mentioned in the
are void in the event the system is altered or damaged by the user, not installed, used and serviced according
to this document.
Important notes in the text:
Throughout the text, warning and information notes in red, as shown below, inform the user about crucial
points to observe. These warnings and informational notes must be followed scrupulously and Axetris AG takes
no responsibility for any personal injury, death or any damage to equipment or property resulting from not
observing these indications.
The warning sign indicates that severe personal injury/death and/or property damage might result from
not observing safety instructions.
The information sign points to particularly important information and instructions.
Axetris AG
LGD Compact Operating & Integration Instructions; Rev. D
General Terms and Conditions of Axetris AG,
6/46
Advertisement
Table of Contents
