Table of Contents
Advertisement
B. Status, Warning and Error Code Listing for Integrators/OEMs
MESSAGE IN GUI
0x02
E
First byte of packet is not "{"
0x04
E
Command ID is not a letter
0x06
E
Unknown Command
0X07
E
Unknown Command
0x08
E
Defined packet size is not a multiple of 8 or
greater than 528 or equal to 0
0x0A
E
Timeout: Not enough data received in the last
400ms
For command >64 bytes not received 64 bytes
For command <64 bytes not all the data has
been received
0x0C
E
Check sum is not correct (small packet < 64
bytes)
0x0F
E
Check sum is not correct
0x10
E
Last byte is not "}"
0x12
E
Unknown command
0x15
E
RS-232 RX Buffer empty. Too few bytes in buffer
within specified time.
0x30
E
Overrun RX data.
A new byte was received but the last one was
not read.
0x42
E
Tried to add more data than the place available
in the stack (RX).
0x5E
E
Char, Int, Float value is out of range.
0x60
E
Baudrate parity or other RS232 error.
0x64
E
Password not correct in Operation command.
0xC2
W
Not allowed to change structured object or
In/output in User mode (example
Measurement).
0xC4
W
Last Character was not a "}".
0xCA
W
Modify data with the wrong password.
0xCC
W
Wrong password.
0xCE
W
Wrong password.
0xD5
W
Ping page too small (protected page)
0xDA
W
Wrong password Config).
0xDC
W
Wrong password (Ping).
0xDE
W
Wrong password (Save).
Axetris AG
LGD Compact Operating & Integration Instructions; Rev. D
Action / Solution
Check command structure.
Check command structure.
Check command structure.
Check command structure.
Check command structure.
Check command structure.
Check command structure.
Check command structure.
Check command structure.
Check command structure.
Check command structure. Respect
timing
Check command structure. Respect
timing.
Check command structure.
Values out of range
Check communication protocol of the
RS232 interface.
Check command structure. Apply
correct password.
n/a
Check command structure.
Check password.
Check password.
Check password.
Check command stgructure
Check password.
Check password.
Check password.
Detailed explanation
First byte of packet is not "{"
Command ID is not a letter
Unknown Command
Unknown Command
Defined packet size is not a multiple of 8 or greater
than 528 or equal to 0
Timeout: Not enough data received in the last 400ms
For command >64 bytes not received 64 bytes
For command <64 bytes not all the data has been
received
Check sum is not correct (small packet < 64 bytes)
Check sum is not correct
Last byte is not "}"
Unknown command
RS-232 RX Buffer empty. Too few bytes in buffer within
specified time.
Overrun RX data.
A new byte was received but the last one was not read.
Tried to add more data than the place available in the
stack (RX).
Char, Int, Float value is out of range.
Baudrate parity or other RS232 error.
Password not correct in Operation command.
Not allowed to change structured object or In/output in
User mode (example Measurement).
Last Character was not a "}".
Modify data with the wrong password.
Wrong password.
Wrong password.
Ping page too small (protected page)
Wrong password Config).
Wrong password (Ping).
Wrong password (Save).
39/46
Advertisement
Table of Contents
