adjust size
Removal and Insertion
Fasten behind the headrests
Removal
Storage space and interior equipment ›
›
Pull out the locking tab
and move the upper
part of the holder to
the desired position.
Set the minimum size of
the empty holder to
avoid noise while driving.
›
Place the open adapter
on the front guide rods
of the headrest and
clip in carefully.
›
Clip in the holder in the
adapter.
›
Press the safety button
and unfold the holder.
Technical data
The holder is for fixing a tablet with a height of min.
12.2 cm and max. 19.5 cm.
The maximum load for the holder is 0.75 kg.
12-Volt power socket
Operating conditions
NOTICE
Risk of damage to the electrical system of the vehi-
cle!
Use the sockets only for the connection of ap-
▶
proved electrical accessories with a total power
consumption of up to 120 watts.
NOTICE
Danger of damage to the connected consumers!
Switch off the consumers before switching the ig-
▶
nition on or off and before starting the engine.
12-Volt power socket
143
›
Press on the adapter
and remove it.