Table of Contents
Advertisement
This function keeps the temperature constant
and prevents the windows from misting.
Switch recirculated air mode on/off
The recirculation mode prevents contaminated
outside air getting into the interior of the vehi-
cle.
Switch cooling system on / off
When the cooling system is switched on, the
temperature and humidity in the vehicle will
drop.
Switching on the cooling system prevents the
windows from misting up.
If the temperature is set outside the numerical
range, one of the following symbols is shown in the
Climatronic display.
LO
Maximum cooling capacity
HI
Maximum heating output
When the air conditioner is operating, the engine
idle speed may increase automatically.
Troubleshooting
Water under the vehicle
When the cooling system is switched on, water can
drip off the air conditioning system. This is not a leak.
Fogging
›
Switch on automatic mode.
Or:
›
Increase the blower speed, switch on the cooling
system, and set the air distribution to the wind-
screen.
Automatic switch-off of the cooling system
If the coolant temperature is too high, the cooling
system may switch off automatically. This ensures
sufficient engine cooling.
Heated windscreen
Usage
Windscreen heating is used for defrosting or venti-
lating the windscreen.
Conditions
✓ The engine is running.
✓ The outside temperature is below about 35°C.
Operation
Rear window heating
›
Press the
button.
Heating and air conditioning system ›
Windscreen heating switches off automatically after
some time.
Troubleshooting
The indicator light in the button or below the but-
ton flashes
The heating does not work as the battery charging
level is low.
Seat heating
What you should be mindful of
WARNING
Risk of burns!
Do not switch on the seat heater for persons with
▶
limited perception of pain or temperature.
NOTICE
Risk of seat damage!
Do not kneel on the seats or otherwise puncture
▶
them.
Do not turn on the heater in the following situa-
▶
tions.
▶
The seat is not occupied.
There are objects on the seat, such as a child
▶
seat.
There are additional seat covers or protective
▶
covers on the seat.
Conditions
✓ The engine is running.
Operation
›
Press the
or
The seat heating is switched on with maximum heat-
ing power. By repeatedly pressing the button, the
heating output is reduced until it is switched off.
The level of the seat heating is indicated by the num-
ber of illuminated indicator lights in the button.
If the seat heating is switched on with the maximum
heating output, the heating output is automatically
reduced after 10 minutes.
Heated windscreen
button.
49
Advertisement
Table of Contents
