Table of Contents
Advertisement
42 Lighting, windscreen wipers and washers ›
Low beam and high beam
Before changing the light bulb for the high beam in
the right headlight
›
Insert one finger into the recess
latch
on the bracket.
B
›
Remove the bracket.
Before changing the light bulb for the low beam
light
›
Adjust the front wheels so that the cover cap in
the wheel arch is accessible.
Replacing the light bulb
Replace light bulbs
›
Disconnect the washer
fluid reservoir from the
bracket.
and lift the
A
›
Insert the bracket from
the tool kit into the re-
cess in the cover cap.
›
Remove the cover by
pulling on the bracket.
Protective caps on the
headlight:
Low beam
A
Main beam
B
›
Remove the associated
protective cap.
on the headlight again.
After changing the light bulb for the low beam
light
›
Insert the cover in the wheel arch and lock into
place.
After changing the light bulb for the high beam in
the right headlight
›
Reinstall the washer fluid reservoir holder.
›
Insert the container nozzle back into the holder.
Front turn signal
Before changing the bulb in the right headlight
›
Press the socket with
the light bulb down-
wards and remove it.
›
Change the bulb in the
socket.
›
Insert the socket with
the new light bulb into
the headlight, so that
the fixing lug
is
A
pointing up.
›
Insert the socket until
it clicks into place.
›
Fit the protective cap
›
Disconnect the washer
fluid reservoir from the
bracket.
Advertisement
Table of Contents
