Table of Contents
Advertisement
174 Storage space and interior equipment ›
Removal
Insert into the rear armrest
Removal
Technical data
The holder is for fixing a tablet with a height of min.
12.2 cm and max. 19.5 cm.
The maximum load for the holder is 0.75 kg.
12-Volt power socket
›
Press the safety button
and unfold the holder.
›
Press on the adapter
and remove it.
›
Clip the holder into the
opening.
›
Press the safety button
and unfold the holder.
12-Volt power socket
Operating conditions
NOTICE
Risk of damage to the electrical system of the vehi-
cle!
Use the sockets only for the connection of ap-
▶
proved electrical accessories with a total power
consumption of up to 120 watts.
NOTICE
Danger of damage to the connected consumers!
Switch off the consumers before switching the ig-
▶
nition on or off and before starting the engine.
230-Volt power socket
Functionality
NOTICE
Danger of damage to the connected consumers!
Do not connect a light with fluorescent lamp to the
▶
socket.
Switch off the consumers before switching the ig-
▶
nition on or off and before starting the engine.
Status display
Lit up in green - the socket is switched on.
▶
Blinking green - the socket is still switched on for
▶
about 10 minutes after the engine has been
switched off, if a consumer was connected before
the engine was switched off.
The socket has a child safety lock. When insert-
ing the plug, the fuse is unlocked and the socket is
switched on.
Operating conditions
✓ The engine is running.
On vehicles with the START-STOP system, the
socket also works in STOP mode.
Troubleshooting
The indicator light flashes red
The socket is switched off for the following reasons.
Excessive current.
▶
Low state of charge of the battery.
▶
Overheating of the socket.
▶
›
If the reasons given above no longer apply and the
socket is still not switched on automatically, dis-
connect the connected consumer from the socket
and reconnect after a short time.
Advertisement
Table of Contents
