Table of Contents
Advertisement
ACC is intended primarily for use on motorways.
Speed range
ACC allows a speed setting in the range of
30-160 km/h.
If control is started at a speed of less than 30 km/h
on vehicles with an automatic transmission, the
speed is automatically increased to 30 km/h or con-
trolled according to the speed of the vehicle ahead.
Distance level
The distance to the vehicle ahead can be adjusted to
five different levels.
WARNING
Maintain a minimum distance in accordance with
▶
the country-specific legal regulations.
Automatic stop and start
A vehicle with an automatic transmission can be de-
celerated to a stop using the ACC and start moving
again. Control is disconnected in case of longer hold-
ing periods.
Overtaking
If your vehicle changes to the fast lane and no vehi-
cle is detected in front, ACC accelerates up to the
set speed.
Status display in the instrument cluster display
illuminates - ACC is activated
illuminates together with
When the control starts, the set speed is dis-
played.
illuminates - ACC does not decelerate suffi-
ciently
›
Depress the brake pedal.
Operation
Operating with the lever
Activate ACC (control inactive)
Driver assist systems ›
Starting control with the current speed
›
Or:
›
If no speed is saved, move the lever to the sprung
position
Set distance level
›
Move the
or .
- Control is active
For temporary acceleration
›
Depress the accelerator pedal.
The vehicle accelerates and control is temporarily in-
terrupted. Upon releasing the accelerator, control is
resumed.
Interrupting cruise control
After pressing the brake pedal.
▶
By operating the clutch pedal for a long time.
▶
After an ESC intervention.
▶
After deactivation of the ASR.
▶
Resuming control
›
If a speed is stored, move the lever to the sprung
position
The vehicle is controlled at the set speed. The set
speed is shown in the instrument cluster display.
Function restriction
WARNING
Be particularly attentive and alert in the following
▶
situations.
Adaptive Cruise Control (ACC)
Start or resume control/Increase speed in
steps of 1 km/h (sprung position)
Stop control (sprung position)
Deactivate ACC
Increase speed in steps of 10 km/h
Reduce speed in steps of 10 km/h
Set distance level
Start control/Reduce speed in steps of 1
km/h
.
.
switch to the sprung position
Line
display, indicating the
change in distance.
›
Use the
to set the desired dis-
tance level.
.
113
, appears on the
A
switch
Advertisement
Table of Contents
