›
Insert one finger in the recess
bracket latch.
›
Remove the bracket.
Replacing the light bulb
Protective cap: Halogen headlights/LED headlights
›
Remove the protective cap from the headlight.
for the wash water container nozzle .
Fog lights
Lighting, windscreen wipers and washers ›
and lift
the
A
B
›
Turn and remove the
socket with the bulb.
›
Change the bulb in the
socket.
›
Insert the socket with
the light bulb into the
headlight and turn it
clockwise
to secure.
›
Reinstall the protective
cap on the headlight.
›
After changing the
bulb in the right head-
light, reuse the bracket
›
Release the cover with
the bracket from the
tool kit and remove it.
›
Attach the connector to the bulb, ensuring it clicks
into place.
›
Reinstall the lamp and screw it on.
›
Replace the cover and push it in until it clicks into
place.
Taillight
Loosen and remove the lamp
›
Remove the lamp with the bracket.
Replace light bulbs
43
›
Unscrew
A.
screws
›
Take out the lamp.
›
Release the connector
and remove it from the
bulb.
›
Turn the light bulb and
take it out.
›
Push the new light bulb
into the light so that
the guide lugs on the
light bulb and the asso-
ciated openings in the
light are in alignment.
›
Turn the bulb clock-
wise
to secure.
›
Unscrew
.
the screws A
›
Insert the bracket from
the tool kit into the re-
cess in the light.
On the left-hand lamp,
the eyelet of the
bracket must point
downwards, and up-
wards on the right
lamp.