Dispensing Milk Foam Via Wand (Option); Dispensing A Double Product - Melitta Cafina XT4 Operating Instructions Manual

4. Position the steam wand over the drip grid.
5. Then press the button for steam dispensing again to
blow out the steam line.
6. Clean the outside of the steam wand immediately
with a clean and damp cloth to remove milk residues.
9 The steam dispensing operation is complete.
6�6

Dispensing milk foam via wand (option)

Depending on the equipment, a milk foam wand may be
available instead of a steam wand. With the milk foam
wand, you can add milk foam to your products separately.
1. Position the cup for the milk foam underneath the
milk foam wand on the drip grid.
2. On the display, press the button for dispensing milk
foam.
9 The product is dispensed.
6�7

Dispensing a double product

If this function is enabled by customer service, you can
request two portions of a coffee/milk product and fill
two cups simultaneously.
2
1
Fig. 21: Dispensing a double product
35878 • 20201001
Dispensing products
1. Position a cup (1) in the center underneath each dis-
pensing nozzle (2).
2. Press the corresponding product button on the
display.
The following prompt appears on the display:
Café Crème
3. Select one of the following options:
• Press the product with the symbol " " (1) to
dispense two portions of the requested product.
• Press the product with the symbol " " (2) to
dispense a single portion of the requested
product.
Note
If neither of the product buttons is pressed,
then a single portion of the product is
dispensed automatically after a short time.
9 The product is dispensed.
2
1
Select product output
Café Crème
* double
Fig. 22: Dispensing a double product
Café Crème
*
Fig. 23: Product dispensing
19
1
2
6